THK Linear Guide
THK Linear guide rails, also known as linear guide rails, slide rails, linear guide rails, and linear slide rails, are used in linear reciprocating movements and can bear a certain torque to achieve high-precision linear motion under high l
More
Anti-rust of FAG Deep Groove Ball Bearing
FAG deep groove ball bearings are the most representative rolling bearings with a wide range of uses. It is suitable for high-speed or even high-speed operation, and it is very durable and does not require frequent maintenance. This type of
More
SKF Self-Aligning Ball And SKF Spherical Roller Bearings 
SKF Self-aligning ball bearings: The SKF self-aligning ball bearing is a bearing equipped with spherical balls between the inner ring of two raceways and the outer ring with spherical raceways. There are two rows of steel balls, the inner r
More
The Difference Between Ball Bearing and Roller Bearing
In bearings field,in genera,it divide the bearings into two different types,one-ball bearings,another-roller bearings. Eric Bearing Limited has enough stock for all different types of bearings,Deep groove ball bearings,Angular contact ball
More
INA Bolt Curve Roller Bearing
INA bolt-shaped curved rollers are generally full-roller structures. The bolt shaft raceway is quenched. To avoid stress concentration, the outer surface of the thick-walled outer ring of the roller is curved. The outer ring has two integra
More
Back-To-Back Installation Of FAG Tapered Roller Bearings
Single-row FAG tapered roller bearings have tapered inner and outer ring raceways. Tapered rollers are generally separated by stamped cages between the inner and outer raceways. This type of product can withstand combined radial and axial l
More
Structural Characteristics Of NSK Tapered Roller Bearings
NSK Tapered roller bearings are separated type bearings. Both inner and outer rings of the bearings have tapered raceways, and the roller is round. The roller is in line contact with the raceway and can bear heavy combined radial and axial
More
FAG Angular Contact Bearings
FAG angular contact ball bearings have a higher limit speed and can bear both radial and axial loads, as well as pure axial loads. The axial load capacity is determined by the contact angle, and the single row angle increases with the conta
More
Characteristics Of SKF Spherical Roller Bearings
What is Spherical roller bearings? The bearing is installed between the outer ring of the spherical surface of the inner ring box of the two raceways, and is equipped with spherical balls. The outer diameter of the self-aligning functional
More
Working Principle Of Automotive Wheel Bearings
In life, the number of automobiles is increasing, and the demand for hub bearings on automobiles is also increasing. Correct installation of automotive hub bearings can increase the driving safety factor of automobiles. Excessive wear and d
More