FAG damaged bearing note what problem

2012-01-29 13:39    Author:admin   Click:

In the actual production, machinery and equipment used by the FAG bearing life directly related to the normal use of the mechanical equipment and its normal production. Although according to the different use of the environment and condition selection of bearing, but there are many FAG bearing in the far did not reach the design life is due to damage and failure. Failure of bearing used in a production which will produce intense vibration and noise, but also can make the relevant parts from being damaged, resulting in a series of adverse impact.

(1 ) note with sealed FAG bearings are not available this method cleaning, sealing the internal should adhere to the same can not be cleaned.

( 2) the assembly surface with clean gasoline, kerosene, toluene or xylene solution to clean, and with a clean dry cloth, then coated with a thin layer of oil, which can make the device operation convenience efficiency.

( 3) facing the device to open the FAG bearing imports package, it is dipped into the liquid to handle the gasoline slowly rotating, to ensure that the cage, roller and raceway outer package oil thoroughly cleaned.

( 4) large bearing cleaning, first with a temperature of 90 to 100 DEG C hot oil pour hot oil to make package condensation, and seamless export and falling debris tool dig the net all the old oil, and then poured hot a few minutes, and then rinse with kerosene oil, then wash with gasoline over. After cleaning, should wear film gloves FAG bearing on the work table clean cloth or paper to dry.

Commonly used cleaning agent for neutral aqueous diesel or kerosene, according to the need of lye and sometimes also use temperature. No matter which kind of cleaning agent, must often filtered clean. After cleaning, immediately after the FAG bearing coated with antirust oil or rust grease.